- Katılım
- 11 Mar 2007
- Mesajlar
- 1,905
- Tepkime puanı
- 4
- Puanları
- 36
Bu döküman vectra b için cdr500 e montaj fotoları...
Ekranda da görüldüğü üzere gelen mesaj geldiği zaman bile uyarı çıkıyor...
Önce ingilizcesi kuvvetli olanlar için açıklaması;
This is a rough guide to add bluetooth capability to your CDR500 (and other opel radios). The VDA adapter exists in most -if not all- opel cars. I've installed this in several Astra-G and Zafira-A and I noticed that in some models the microphone cable is missing. In my car it was installed - the top end was tied somewhere behind the interior light cabling. Anyway from the following pictures you will get the general idea.
After the installation the operation is easy. When you get a call the radio is muted and the telephone sound is heard from the car speakers. The MID shows either 'message' or 'phone' depending on the display type.
Next locate the microphone cable -if exists behind the interior light. Again notice the paper tape that is used to hold it together to some other car cables.
Finally install the transformer and the fuse at the correct places.





Ekranda da görüldüğü üzere gelen mesaj geldiği zaman bile uyarı çıkıyor...
Önce ingilizcesi kuvvetli olanlar için açıklaması;
This is a rough guide to add bluetooth capability to your CDR500 (and other opel radios). The VDA adapter exists in most -if not all- opel cars. I've installed this in several Astra-G and Zafira-A and I noticed that in some models the microphone cable is missing. In my car it was installed - the top end was tied somewhere behind the interior light cabling. Anyway from the following pictures you will get the general idea.
After the installation the operation is easy. When you get a call the radio is muted and the telephone sound is heard from the car speakers. The MID shows either 'message' or 'phone' depending on the display type.
Next locate the microphone cable -if exists behind the interior light. Again notice the paper tape that is used to hold it together to some other car cables.
Finally install the transformer and the fuse at the correct places.




